Rebuilding RAID after reinstalling the system

Purpose

This tutorial will guide you through using the Files application to download and replace the local-storage.db file, enabling you to migrate or restore RAID configuration data after reinstalling the system.

Operation Steps

1. Download local-storage.db File
   a. Access Files on ZimaCube.
   b. In Files, set the access path to /ZimaOS-HD/.casaos/db.
   c. Find the local-storage.db file and download it to your local device.
2. Reinstall the System
   a. Safely shut down ZimaCube, ensuring the device is completely powered off.
   b. Replace the system SSD drive as needed and reinstall ZimaOS.
   c. Start ZimaCube, ensuring ZimaOS is installed successfully and running normally.
3. Upload and Replace local-storage.db File
   a. Open Files and navigate to the /ZimaOS-HD/.casaos/db directory again.
   b. Find the local-storage.db file in the current directory and rename it to local-storage.db.bak to keep a backup.
   c. Upload the local-storage.db file downloaded in Step 1 to the current directory.
4. Restart ZimaCube:
   After replacing the file, restart the ZimaCube device to ensure all changes take effect.

Notes

• Ensure all important data is backed up before proceeding to avoid data loss due to errors.
• If you encounter issues with installation or configuration, check your network connection or contact technical support.